Unlocking the Power of Smart Lock: A Beginner’s Guide for Poco X6 Users

Google constantly comes up with features to simplify the way users interact and complete tasks on the Android platform. One of the most important features that techies loved to debate about was the Smart Lock Android, a secure password manager functioning in sync with a Google account on the Android phone.

Part 1: What is Android Smart Lock?

Android Lollipop added a feature called Smart Lock, and the feature was devised as a smart tool to prevent the Android phone from locking once it was initially unlocked. In other words, the feature overrides an Android phone’s Lock Screen feature, thereby saving users the need to enter passwords every time the Poco X6 device locks.

If you’re at home, it’s likely your android phone is locked out if you haven’t accessed at for some time. Smart Locks solves the problem in many ways. It allows you to allocate trusted places. Once you within range of the trusted places, your phone won’t lock. Trusted devices come next. Smart Lock is assigned to Bluetooth and Android NFC unlock devices.

Finally, trusted face unlocking is the ultimate face recognition system that unlocks your Android device as soon as you look at it across the front-facing camera. A face unlock first introduced with Android Jelly Bean and has been significantly improved in later versions.

Turning On Smart Lock

The feature is enabled by first accessing settings. For example, in a Samsung Galaxy S6:

Tap on Settings, which is the gear symbol.

• • Click on Personal and tap on Security.
• • Go to Advanced and tap on Trust agents and make sure Smart Lock is turned on.

• • Under Screen Security tap Smart Lock.
• • Here, you need to enter your Screen Lock. If you haven’t done so, set up a password and PIN by following the on-screen prompts. The screen Lock is needed every time you have to change the Smart Lock settings.

Within Smart Lock, there are three options for setting the system. You can set up trusted devices, trusted face, and trusted places individually, combining two or all three at the same time. You can choose just one trusted face, but you have the option to set up as many trusted devices and trusted places as needed.

Part 2: Turn On Smart Lock For Android with Trusted Devices

You can decide on a trusted device to be paired with Smart Lock Android.

For example, you can set up a Smart Lock for Bluetooth in your Android Bluetooth settings. It can also be done for Android NFC unlock devices. Examples include the Bluetooth system in your car, NFC unlocks, android sticker on the car’s phone dock, or Bluetooth in your watch.

• • Go to Settings.
• • Tap on Security and then Smart Lock.
• • Existing paired options are listed under Trusted Devices.
• • Initially, trusted devices will show None.

Tap on Add Trusted Devices.

The next screen is the Choose Device Type.

Since you have already paired Bluetooth, it will ask you to choose the Poco X6 device from the list.

• • As an example, let’s take the case of LG HBS800. It may show Not connected until you add it.
• • It will show up under Trusted devices in the Smart Lock menu.
• • When you turn the added device on, Smart Lock now unlocks the Android mobile.

Similarly, other Bluetooth and NFC unlock android supported gadgets can be added under the list of Trusted Devices.

Part 3: Turn On Smart Lock For Android With Trusted Locations

You can also add locations or addresses to Smart Lock Trusted Locations, and the phone unlocks automatically as soon as you arrive at the desired location. For example, you can set up your home or work address under Trusted Locations.

Check current settings first.

On a new Android phone, visit Settings>Personal.

Then Lock Screen and Security.

Then Secure Lock Settings.

Tap Smart Lock.

Tap on Trusted Places.

Tap on Add Trusted Places

• • Initiate the Google Maps app on the Android phone. Make sure the Internet and GPS are on.
• • Pick a place.

• • Click on Settings.
• • Click on Edit home or work. You can now add or edit the required addresses.
• • As an example, click on the Enter work address.
• • You now have the option to type in the address or use the address listed on Google Maps as the required work address.

• • A successful addition is listed and can be edited under the Edit work address.
• • Close the Google Maps app.
• • The work address is automatically propagated and configured with Smart Lock settings.
• • Go back to Settings> Security> Smart Lock> Trusted Places.
• • The work address you added is now listed under Work.

• • However, it is not yet configured as a Smart Lock option. Tap the location once, and it is enabled.
• • The switch along the address to the right turns blue, indicating it is enabled.
• • The work address is now listed under Trusted places for Work.

• • The phone is now configured for the work address and will unlock whenever you are at the location.
• • Since it works on Google Maps, the feature works through an Internet connection.

Part 4: Turn On Smart Lock For Android With Trusted Face

The feature recognizes your face and then unlocks the Poco X6 device. Once you set up the Poco X6 device to recognize your face as a trusted face, it will unlock the Poco X6 device as soon as it recognizes you.

PRECAUTION:  At best, this can be the first level of security, as one who resembles you to some extent can unlock the Poco X6 device. Photographs are not stored in the system. The device does hold necessary data to recognize your face, and the security level is determined by how good the Poco X6 device is configured. The data is not accessed by any app or loaded onto a Google server for backup.

Setting Up Trusted Face

• • Go to Smart Lock and tap Trusted Face.
• • Tap on Setup. Follow on-screen instructions.

The device begins to gather data about your face. The trusted face icon appears. As a backup, in case Smart Lock does not recognize your face, use the manual system by applying the PIN or password to unlock the Poco X6 device.

In case Trusted Face is not required, tap on reset Trusted Face appearing under the Trusted Face menu. Tap on Reset to reset the option.

How To Improve Facial Recognition In Your Bluetooth and Android NFC Unlock Devices

• • If you feel facial recognition is not up to the mark, go to Smart Lock and tap on a Trusted face.
• • Tap on Improve face matching.
• • Tap on Next and follow instructions on the screen to complete the task.

Smart Lock Android is a great feature and is only going to improve on time. With added security measures being introduced by Google for Bluetooth and NFC unlock android devices, including configuration to Google maps and Gmail, the feature may be one of the most important features to overcome constant blocking of devices even in protected places.

Video on How to Remove Android Lock Screen Without Data Loss

How to Reset a Poco X6 Phone that is Locked?

We all have been there when put a tough to crack the lock on the smartphone and forget the password all along. Such circumstances can be tedious at times, but there is a way around it. If you have spent countless hours on how to reset a Poco X6 phone that is locked, or how to get into a locked Poco X6 phone quickly with or without Factory Reset. This is the right article for you. Here we will describe all the different ways in which you can reset your phone with the convenience of software to even reset it manually. So, without making further due, let’s jump right into it.

Part 1: What should I be aware of before resetting a Poco X6 Phone that is locked?

Before you go to reset your locked Poco X6 phone, it’s crucial to learn about a few key factors. These factors will enable you to make a well-informed choice and help avoid potential complications during the factory reset process.

1. Data Loss

Resetting your locked Poco X6 phone typically involves performing a factory reset. The process erases all data and settings on the Poco X6 device. This includes your files, apps, contacts, and other information stored on the phone. You can easily restore these data if you have backed up data before. It’s crucial to back up essential data regularly to avoid data loss.

2. Factory Reset Protection (FRP)

Poco X6 , like many other Android manufacturers, implements Factory Reset Protection. It acts as a preemptive safeguard against unauthorized access to a device after a reset. If your phone is linked to a Google account, you will need to input the accurate login credentials after a reset.

Failing to do so may lead to your device being locked. Understanding how to bypass or recover from FRP lock is essential if you find yourself in this situation.

Part 2: How to Reset a Poco X6 Phone That is Locked With Google Find My Device?

Resetting a locked Poco X6 phone through Google Find My Device presents a convenient solution. It, however, needs you to have activated this functionality on your device. To initiate the reset, please adhere to the following steps:

Step 1: Open a web browser on any computer or alternative device and navigate to the Google Find My Device website. Sign in with the same Google account associated with your locked Poco X6 phone.

Step 2: Upon successful login, a list of devices linked to your Google account will be displayed. Locate your locked Poco X6 phone from the list and select it. Select the “Erase Device” option from the left-hand panel, and it will trigger a remote factory reset for your locked phone.

Step 3: A confirmation dialog will appear, prompting you to input your Google account password. Finally, click the “Erase” button to initiate the factory reset process.

Part 3: How to reset a Poco X6 phone that is locked without a password?

In order to reset your Poco X6 phone without a password, you need to have a single software known as Dr.Fone - Screen Unlock (Android) . It’s a powerful and versatile software tool designed to help you unlock your devices under various circumstances. Whether you’ve forgotten your device’s password, PIN, pattern, or fingerprint, or you’re dealing with a locked device due to a broken screen, Dr.Fone - Screen Unlock (Android) can assist you. In order to reset phone correctly, go through the steps given below:

Before resetting your Poco X6 phone that is locked, you can install the Dr.Fone application on your Windows PC or Mac first.

Dr.Fone - Screen Unlock (Android)

The Best Unlock Tool to Reset a Poco X6 Phone That Is Locked Without a Password!

• Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
• Work for forgotten passwords, second-hand Poco X6 devices, etc.
• Everyone can handle the lock screen without any tech knowledge.
• Provide specific removal solutions to promise good success rate.

4,008,671 people have downloaded it

Step 1: Launch the Program

First of all, launch the Dr.Fone Screen Unlock on your computer, and you will be greeted with a welcome screen like this. Now, head over to the “Screen Unlock” section.

Step 2: Connect Device

Now, you need to connect your Poco X6 phone to the computer via a USB cable and select “Android” > “Unlock Android Screen.” This particular step is an application for all the Android phones out there.

Step 3: Choose Device Model

Here you need to select the exact brand of your phone. In your case, you can just tap “Poco X6 .” The program then will start the process for the lock screen removal.

Step 4: Unlock Screen

Go along with the instructions on the screen and remove all the settings of the Poco X6 device. Within a short while, the screen will be unlocked.

After the entire process is completed, you can easily access your Poco X6 Phone without the need to enter your password. All the restrictions that were set properly to unlock will be removed so that you can use your phone as intended.

Part 4: How to reset a Poco X6 phone that is locked with a hard reset

Disclaimer: Only perform this step if you are well accustomed to the Android recovery system or at least know your way around your Poco X6 phone.

That being said, you should only resort to using a hard reset if you don’t have any important data on your phone. Further including, resetting your phone with the hard reset option will wipe out any data that’s been stored in it. Now, proceed forward will all the steps are given below:

Step 1: Charge Device

Charge your Poco X6 Phone so that it has a batter of at least 30% or higher. Then turn off the phone.

Step 2: Press keys

Now, you need to press the Volume Down + Power button simultaneously until the Poco X6 device logo shows up on the screen.

Step 3: Enter Recovery Mode

Now, press the Volume Down button to navigate to the Recovery Mode.

Step 4: Factory Reset

Use the buttons to navigate to the “Wipe data/factory reset” option and select it by pressing the Power button. Now, choose the option ”Factory data Reset” and wait for a few seconds till it is completed.

Step 5: Reboot Now

Again use the Volume buttons and select the “Reboot system now.”

After you have successfully reset your Poco X6 phone, it would take a few minutes to boot up. Once that is done, you are left with a clean slate, just like a completely new smartphone.

Part 5: Unlock locked Poco X6 phone with Gmail ID and password

It is imperative to understand that unlocking your Poco X6 Phone using a Gmail ID and password should be your last resort and especially if you are using an older version of Android. Among all the tricks of how to reset a Poco X6 phone that is locked, it only works if you are running around version 4.4 KitKat or older than that. Neither less to say, in order for the step to work properly, you need your Gmail account to be properly configured with the Poco X6 device.

Step 1: Attempt Passwords

At first, you need to make five attempts to unlock your device. Whether you have used a PIN or Pattern lock, Android will always give you five attempts to get the password right. Once you get that, it will trigger the “Forget Password/Pattern” option on Your Poco X6. This way, you can sneak back into the system once again.

Step 2: Enter Credentials

Once you hit the option, you will be redirected to another page, where you need to enter your Gmail id and password. Make sure that you get the information right, and select “Sign in.”

Once you get everything right, this will bypass any password or pattern you once had put on your Phone. Just remember, you need to have a stable internet connection in order for the step to work seamlessly.

Bonus Tip: Are There Preventive Measures To Avoid Future Lockouts?

Want to prevent future lockouts and ensure a smoother smartphone experience? Consider implementing the following preventive measures:

1. Setting Up Alternative Lock Methods

One way to avoid getting locked out of your Poco X6 phone is to set up alternative lock methods. In addition to PINs, passwords, and patterns, you can use biometric methods. These include fingerprint recognition or facial recognition if your device supports them. Such options provide convenient and secure ways to unlock your phone.

2. Regularly Backing Up Your Data

Regular data backups are crucial to safeguarding your essential files and information. Utilize cloud backup services or local backup solutions to routinely save your data. In case of a lockout or a factory reset, you can quickly restore your data without loss.

3. Using Secure and Memorable Passwords

When setting up lock methods, opt for strong, unique, and memorable passwords. Avoid using easily guessable information like birthdays or simple patterns. Strong passwords can enhance security while minimizing the chances of forgetting your credentials.

Conclusion

There is no point in arguing that looking through how to reset a Poco X6 phone that is locked after you have forgotten the password is indeed a hectic process. But, there is a way around it too. By going through all the steps mentioned above, you can always get an unlocked phone with ease.

To our recommendation, we would suggest going through Dr.Fone - Screen Unlock (Android) so that you can make the entire process as seamless as possible. It is by far the easiest and most convenient process to work around. Neither less to say, there are a ton of video tutorials that can assist you in case you get stuck in the middle of the process.

Tips and Tricks for Setting Up your Poco X6 Phone Pattern Lock

Failing to remember the pattern lock of a phone is one of the most puzzling situations for Android users. Unlike the famous OS, Android gives a seamless method to eliminate the issue.

You can attempt the methods below or an expert tool if you have forgotten the pattern lock on your gadget and reset it. However, we suggest you try Dr.Fone - Screen Unlock for a quick and safe solution. To make things more straightforward, we have given you other techniques as a workaround to the issue.

So, keep following us to unlock the lock screen pattern and use your phone again.

Part 1: What Is Android Pattern?

A pattern lock is used to identify the actual user by your Android phone. It is a widely used phone locking system and a secured one. Simply put, a pattern lock includes a line pattern you choose that you can draw to unlock a lock screen. You can enable this lock screen feature from the security menu in the settings application.

So, if you have set a pattern lock as a screen lock for your device, you will need to draw the exact pattern every time you log in.

Part 2: Best Tool to Unlock Your Pattern

Dr.Fone - Screen Unlock

The most effective and quick tool to unlock a pattern lock is Dr.Fone - Screen Unlock by Wondershare. Dr.Fone is an all-in-one tool for all your Android needs and has been in the business for a long time. We suggest you use Dr.Fone. The following steps will help you unlock your device:

Step 1. Select the “Screen Unlock” option in the Dr.Fone interface.

Step 2. Select Unlock Android Screen

To unlock the pattern lock on your device, the “Unlock Android Screen” will guide you to finish the whole process.

Step 3. Select unlock mode

If you click “Remove without Data Loss,” only some limited Samsung or LG phone models can be unlocked without losing data. To unlock most phone brands’ screens, “100% Remove Screen Lock” is a better choice.

You can find the brand compatible with your phone in the following list.

Step 4. Go into Recovery Mode

Read the program instructions carefully; entering recovery mode is the prerequisite to unlocking the pattern lock.

(Here are 3 examples of Samsung phones)

How to get into recovery mode with Bixby

How to get into recovery mode without Bixby

How to get into recovery mode with Home button

Step 5. Instructions to Wipe Cache Partition

Now you’re in recovery mode, pick these options in the image below.

When the “Unlocked successfully” appears on the screen, you can access your device without a pattern lock or other locks!

Part 3: How to Bypass Android Pattern When You Forgot It?

1. Google Find My Device (For Android7.1.1 or later)

Step 1. Open the Android Device Manager site by typing https://www.google.com/android/find in an internet browser.

Step 2. You must give your Google ID credentials to sign in. Remember that this should be a similar Google account connected to your phone.

Step 3. After logging in, select your device.

Step 4. You will get three choices here, i.e., lock, erase, and ring.

Step 5. Click on the “Lock” button to reset its pattern.

Step 6. It will open another spring-up window. From here, you can give the new password to your phone.

Step 7. After affirming your PIN/password, you can give a recovery message and number (in case of theft only).

Step 8. Complete the process and sign out of your account on the browser.

2. Forgot Pattern (For Android 4.4 or earlier)

Step 1. First and foremost, give some wrong patterns to your phone. It will tell you that you attempted the incorrect pattern lock.

Step 2. On a similar window, click the “Forgot pattern” choice on the base.

Step 3. That will open another screen, which you can use to sidestep the forgotten pattern of Android. Select the choice for entering the Google Account credentials and continue.

Step 4. To reset the lock screen pattern, you must give the correct details of the Google ID previously logged into the Poco X6 device.

Step 5. After giving the correct details, you can provide another pattern lock to the phone.

Step 6. Affirm your decision and set another pattern lock on your phone.

3. Emergency Call Trick (For Android 5 or 5.1.1)

Step 1: Tap the Emergency Call button and enter ten asterisks (*).

Step 2: Copy and paste the asterisks on the dialer until you no longer see the paste choice.

Step 3: Return to the lock screen and tap on the camera symbol.

Step 4: Press the settings choice on your Android gadget after pulling down the notification tray. Now you will have the chance to enter the PIN/password, and you ought to continue unlocking your Android phone. Continue to paste until the lock screen UI crashes.

4. Safe Mode Boot (For Android 4.1 or later)

Step 1: You can bring up the power menu and hold the “Power Off” button for most phones, especially Android phones. A warning will spring up, asking whether you might want to Reboot to Safe Mode. Here, it would help if you had to press Ok.

Step 2: Clear your lock screen application’s data.

Clean data off your lock screen app, uninstall it, and then reboot your device to escape safe mode. When you do so, your phone or Android device will unlock.

5. Use ADB (USB required for Android 10 and lower)

• Connect your device to your PC using a USB connector.
• On your PC, open a terminal window (or command prompt).
• Type in the commands given below. Press Enter after each line:

adb shell

album/data/data/com.android.providers.settings/databases

sqlite3 settings.db

update system set value=0 where name=’lock_pattern_autolock’;

update system set value=0 where name=’lockscreen.lockedoutpermanently’;

.quit

exit

adb reboot

• After your gadget has rebooted, enter the command below:

adb shell

rm/data/framework/gesture.key

exit

adb reboot

• Your phone will reboot. After it reboots and requests a security pattern, you can utilize any pattern, and it will unlock.

Conclusion

This guide provides insight into the most common Android issue. Here, we have discussed different techniques to bypass the pattern lock on your Android phone. However, we suggest you go for a professional tool while carrying this out. Therefore, you should choose an expert tool like Dr.Fone - Screen Unlock to open the lock screen pattern.

Also read: