Top 12 Prominent Poco M6 Pro 4G Fingerprint Not Working Solutions

Part 1. Optimal Solution: Unlock With Wondershare Dr.Fone Directly

Facing a malfunctioning fingerprint on your Poco M6 Pro 4G can be frustrating. In this scenario, the most effective resolution is the removal of the registered fingerprint. Yet, traditional methods of removing the fingerprint can be difficult and pose security risks. In this case, going for tools like Wondershare Dr.Fone is the best choice. This tool ensures your Pixel device is at no risk.

Dr.Fone offers a swift solution to remove the Android lock screen in five minutes. It effectively removes 4 types of screen locks. These include patterns, PINs, passwords, and fingerprints. Dr.Fone can bypass the Android FRP lock without needing a PIN or Google account. It ensures accessibility to the Android device without such credentials.

Dr.Fone - Screen Unlock (Android)

The Best UnlockJunky Alternative to Bypass FRP and Solve Your Screen Locks

• Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
• Bypass the FRP lock of Samsung without a PIN or Google account.
• Everyone can handle the lock screen without any tech knowledge.
• Provide specific removal solutions to promise good success rate.

4,008,672 people have downloaded it

Prominent Features of Wondershare Dr.Fone

1. FRP bypass is enabled for brands like Samsung, Xiaomi, Redmi, Oppo, Realme , and Vivo.
2. With Dr.Fone, bypassing screen locks can be achieved without data loss.
3. Fone supports 2000+ Android phones and tablets from over 18 brands for screen unlocking.

Step-by-Step Guide To Remove Fingerprint Type Lock on Google Pixel Using Dr.Fone

With Dr.Fone, you can resolve the Poco M6 Pro 4G fingerprint sensor not working issue within minutes. Below is a detailed walkthrough for removing a fingerprint lock on a Google Pixel:

• Step 1: Connecting and Accessing Screen Unlock Feature on Dr.Fone

Open Wondershare Dr.Fone and connect your Android device via a USB cable. Once the connection is established, navigate to the “Toolbox” tab and choose “Screen Unlock.” Upon reaching the new screen, choose the “Android” option. Then, select “Unlock Android Screen” from the options on the following screen.

• Step 2: Selecting Google As the Poco M6 Pro 4G device Brand and Activating Recovery Mode

Afterward, you’ll be guided to a subsequent screen prompting you to choose the Poco M6 Pro 4G device brand, Google. Once you select the brand, you’ll be directed to enter a specific mode corresponding to it. For Google Pixel Devices, the specific mode to enter is Recovery Mode. Simply follow the on-screen instructions to activate Recovery Mode on your device.

• Step 3: Initiate the Fingerprint Removal Process

After entering Recovery Mode, the screen unlocking procedure will initiate automatically. Please wait for the fingerprint removal process to finish. In case of failure, select “Try Again” to attempt unlocking again. Upon successfully unlocking your Android device’s screen, tap “Done.”

Part 2. 11 Conventional Solutions To Resolve Pixel Fingerprint Not Working

The solution above using Wondershare Dr.Fone is an effective and comprehensive method. It can tackle fingerprint recognition issues, but sometimes, users may look for simpler alternatives. We will explore conventional solutions that can address Pixel fingerprint problems. Each solution will also explain the underlying reasons for the Pixel 6 fingerprint sensor issue.

1. Fingerprint Sensor Not Touched Firmly

Problem

If the fingerprint sensor fails to recognize your fingerprint, it might be due to inadequate pressure. This could also be due to improper finger placement on the sensor.

Solution: Firm Placement

Ensure you firmly place your finger on the sensor, covering it entirely. Avoid too much pressure, but make sure the sensor fully contacts your fingerprint.

2. Device Showing Glitches

Problem

Glitches or software bugs in your Pixel device may cause disruptions. This can include issues with the fingerprint sensor’s functionality. These problems can range from minor issues to severe software glitches.

Solution: Restart Your Pixel Device

One of the easiest and simplest solutions is to restart your Pixel phone. You can do that by pressing the “Power” and the “Volume Up” keys. It will lead to a pop-up power menu where you must choose “Restart” to reboot your device.

3. Outdated Firmware

Problem

An outdated operating system or firmware can lead to compatibility issues. This can lead to malfunctioning features like the Pixel 6A fingerprint sensor not working.

Solution: Check for Updates

The best way to resolve this issue is to update your Pixel device. Having an outdated version of Android OS can lead to an accumulation of bugs and glitches. Moreover, it can seriously affect the Poco M6 Pro 4G device’s performance, causing many issues. Here is how to check and update your Pixel phone:

Instructions. On your Pixel device, access the “Settings” app. Within Settings, scroll down to tap the “System” option. On the following screen, hit the “System update” option to check if any latest update is available. Here, if you see any updates, download and install them promptly. Before initiating the update, ensure your device is connected to a stable Wi-Fi network with sufficient battery charge.

4. Dirty Phone or Sensor

Problem

Accumulated dirt, dust, or residue on the phone or fingerprint sensor can cause obstruction. This can lead to the failure to properly recognize your fingerprint.

Solution

1. Cleaning the Phone

Employ a gentle, dry microfiber cloth for wiping down the complete surface of your Pixel device. Take particular care to thoroughly clean the region surrounding the fingerprint sensor. Refrain from utilizing rough substances or strong chemicals as they could potentially cause harm to the Poco M6 Pro 4G device.

2. Fingerprint Sensor Cleaning

Gently wipe the fingerprint sensor area using a clean, dry cloth to ensure thorough cleaning. For better results, consider using a dampened cotton swab with water or isopropyl alcohol. Before using it again, ensure the sensor is entirely dry.

3. Compressed Air or Soft Brush

Use compressed air or a soft brush if there’s visible debris or particles around the sensor. Be cautious not to apply excessive pressure that might damage the sensor.

5. Screen Protector: Dirty or Damaged

Problem

A smudged or impaired screen protector might disrupt the working of the fingerprint sensor. This can potentially cause it to fail to recognize your fingerprint.

Solution

1. Clean the Screen Protector

Start by effectively cleaning the screen protector on your Pixel device. For a thorough cleaning, consider utilizing a screen cleaning solution. Ensure that the screen protector is free from any dirt or debris.

2. Replace Damaged Protectors

Is the screen protector visibly damaged, scratched, or peeling off? If yes, consider replacing it with a new one. Damaged protectors can hinder fingerprint recognition and compromise device protection.

3. Check Compatibility

Ensure the screen protector is designed to be compatible with fingerprint sensors. Some protectors may obstruct or interfere with the sensor’s functionality.

4. Remove Air Bubbles

There can be air bubbles trapped under the screen protector. If there are, gently press them out towards the edges using a card designed for this purpose.

6. Clean Your Finger

Problem

The problem may lie with your fingers rather than the Poco M6 Pro 4G device. Unclean or moist fingers can hinder accurate fingerprint recognition on the sensor, causing the Poco M6 Pro 4G fingerprint sensor to not work.

Solution

1. Cleanse and Dry Your Hands

Remove any dirt, oil, or moisture that might cause issues with the fingerprint sensor. It’s crucial to wash and thoroughly dry your hands. Additionally, verify that your fingers are entirely dry before engaging the sensor. The reason is any moisture or dampness may cause inaccuracies in fingerprint identification.

2. Avoid Oily or Greasy Substances

Refrain from touching oily or greasy surfaces before using the fingerprint sensor. These substances can transfer onto your fingers, affecting sensor accuracy. If your fingers are dirty or damp, pause to clean them using a dry, clean cloth.

7. Covering Screen if Fingerprint on Screen

Problem

Fingerprint marks or smudges on the screen might disrupt sensor functionality. This leads to inaccurate recognition when you try to unlock your device.

Solution

1. Avoid Covering the Sensor Area

Be cautious while cleaning the screen to avoid covering or smudging the area around the fingerprint sensor. Precise cleaning around this area prevents interference with sensor functionality.

2. Use Proper Holding Technique

While holding the Poco M6 Pro 4G device, avoid placing your fingers or palms over the fingerprint sensor. Opt for holding the Poco M6 Pro 4G device to minimize accidental contact with the sensor area.

8. Fingerprint Sensor Not Visible

Problem

Misconfigured settings on your Pixel device can lead to situations where the fingerprint sensor is not visible. It can lead to scenarios where the Poco M6 Pro 4G device fails to recognize your screen unlocking attempt.

Solution: Adjust the Setting To Consistently Display the Sensor

You must adjust the display settings to ensure the fingerprint sensor is always visible. To do that, you can begin by opening the Settings app. Navigate to the “Display” tab and select “Lock Screen.” On the following window, toggle on “Always show time and info.”

9. Low Touch Sensitivity

Problem

The fingerprint sensor may have low touch sensitivity . It can lead to difficulties in accurately recognizing fingerprints, leading to Poco M6 Pro 4G fingerprint not working.

Solution

1. Adjust Sensitivity Settings

Accessories like a screen protector might impact the performance of your Pixel device’s touch sensitivity. When using a screen protector, your Pixel enhances touch sensitivity. To do that, navigate to the Settings app and open it. Move to the “Display” window and scroll down to the last option. Toggle on the “Screen protector mode” to increase the screen sensitivity.

2. Finger Re-Enrollment

Delete existing fingerprints and re-register them. This re-enrollment can sometimes improve sensitivity and help remove the issues. Here is how you can delete and re-enroll your fingerprint:

• Step 1. In the Settings app of your Pixel, tap “Security & Privacy.” Then, press “Device Unlock” and choose “Fingerprint Unlock.” The device will now ask you to provide your device PIN or password.

• Step 2. Tap “Fingerprint Unlock” on the following screen and delete the previously enrolled fingerprints. Then, press “Add fingerprint” and follow the on-screen prompts to complete the process.

10. Other Hardware Issues

Problem

Persistent fingerprint sensor problems might indicate underlying hardware issues . This could go beyond common troubleshooting and might require professional help.

Solution

1. Inspect for Physical Damage

Thoroughly examine your Pixel device for any physical damage. These include cracks, dents, or scratches around the fingerprint sensor area. Physical damage could affect the sensor’s functionality.

2. Safe Mode Check

Boot the Poco M6 Pro 4G device in safe mode to determine if third-party apps are causing conflicts. To do that, press the “Power” key with any volume key to access the power menu. Afterward, long-press the “Power Off” option until the “Reboot to Safe Mode” option appears on your device’s screen. Press “OK” to reboot into Safe Mode and test the fingerprint sensor’s functionality.

3. Professional Assessment

If you suspect hardware issues, seek professional help from authorized service centers. A clear sign of hardware issues can be visible damage or the sensor failing to function even in safe mode.

11. Factory Reset as Last Resort

Problem

Did all other troubleshooting methods fail to resolve persistent fingerprint sensor issues? Then, a factory reset might be required to revert the Poco M6 Pro 4G device to its original settings.

Solution

1. Backup Data

Before initiating a factory reset, ensure that all crucial data is safeguarded. This encompasses contacts, photos, documents, and any other significant files. Use Google’s backup services or third-party apps to securely back up your data .

2. Initiating Factory Reset

Proceed with the following steps to execute a factory reset on your Pixel device:

• Step 1. On your Pixel smartphone, navigate to Settings and access the “System” tab. Here, scroll down to the bottom and tap “Reset Options.”

• Step 2. In “Reset Options,” choose “Erase All Data (Factory Reset)” to continue. Afterward, select “Erase All Data” on the next screen and follow the instructions to complete the process.

In summary, this article detailed various methods to fix the Poco M6 Pro 4G fingerprint not working. Diverse approaches were explored, from simple steps like sensor cleaning to advanced solutions like factory resets. However, Dr.Fone stands out among these solutions as a top-tier option. It offers a secure and efficient resolution to the persistent problem of fingerprint failure on the Poco M6 Pro 4G .

A Complete Guide To OEM Unlocking on Poco M6 Pro 4G

Android, known worldwide as a major player in phone operating systems, stands out for its flexibility and open-source nature. This allows users to customize their devices extensively. However, despite this openness, certain features and capabilities can still be locked or restricted, either by Google or the Poco M6 Pro 4G device manufacturer.

For those looking to truly unleash the full potential of their Android device, an OEM unlock is an essential step. This article will delve into the process of OEM unlocking on Android, guiding you through its benefits and how to safely perform it.

OEM lock might sound like technical jargon to many. However, it’s a key concept for those who wish to dive deeper into Android customization. OEM stands for Original Equipment Manufacturer. Unlocking in this context refers to removing restrictions made by the manufacturer on the Poco M6 Pro 4G device.

This process allows you to gain deeper access to the Poco M6 Pro 4G device’s software. Thus, OEM unlocking is often required for customizing or modifying the system at a more advanced level.

Why Enable OEM Unlock?

The primary reason to enable OEM unlocking is to gain the ability to root your device or install custom firmware, also known as ROMs. Rooting is the Android equivalent of jailbreaking. It allows users to access and modify the Poco M6 Pro 4G device’s software at the deepest level.

This can enable the installation of apps and software that require more permissions than what is typically available. On the other hand, custom ROMs can change your device’s interface. They can also add features not available in the stock version of Android.

Pros and Cons of OEM Unlocking

Here are some great things you can get when you allow OEM unlock.

• The most significant advantage is the ability to customize your device far beyond what’s possible with standard settings.
• Root access. It allows for rooting the phone enabling advanced features and apps.
• Custom ROMs. Users can install different versions of Android or entirely new operating systems.

On the other hand, here are some cons that you must consider before performing the process on your phone:

• Security risks. Root access can make your device more vulnerable to malware and hacking.
• Void warranty. OEM unlocking often voids the manufacturer’s warranty.
• Potential for bricking. Incorrect procedures can render the Poco M6 Pro 4G device unusable, known as ‘bricking’.

Understanding the Risks

It’s crucial to understand that OEM unlocking is not without its risks. It does open the door to several customizations and tweaks. However, it can also compromise the security of your device. There’s always a chance of bricking your phone, especially if the unlocking process isn’t followed correctly or an unstable custom ROM is installed.

Additionally, most manufacturers will void your warranty once you unlock the bootloader. This leaves you without support in case something goes wrong. So, in the next sections, you’ll be guided through the steps of OEM unlocking. You’ll also learn how to do it safely, ensuring you make the most out of your Android device.

Part 2: How To Enable OEM Unlock on Your Android Phone

Enabling OEM unlock can feel like stepping into uncharted territory. Still, it’s relatively straightforward if you follow the right steps. Before you start, it’s important to remember that the exact process can vary slightly depending on your device’s brand and model. However, the general steps are usually similar across most Android devices.

• Step 1: Before proceeding, ensure you back up all important data. Enabling OEM unlock may require a factory reset, which erases all data on the Poco M6 Pro 4G device.
• Step 2: Go to your phone’s Settings > About Phone. Then, tap on the Build number seven times. You should see a message that says you’re now a developer.
• Step 3: Find and select Developer options on Settings. Then, tap OEM unlocking. You might need to enter a PIN or password.

Here are some common links where you might find the needed PIN or password:

• HTC
• LG
• Sony
• Huawei
• Motorola
• Samsung

After these steps, your device’s bootloader is now unlocked, and you can proceed with rooting or installing custom ROMs. Remember that this is a significant change to your device’s system, and it should be done cautiously and ideally only if you’re comfortable with potential risks.

Part 3: What Can You Do After OEM Unlock?

Unlocking your phone’s OEM opens up a world of possibilities. It allows you to customize your device beyond what’s available in its factory settings. This newfound freedom, however, comes with its own set of responsibilities and risks. Here’s what you can do after having your phone OEM unlocked.

Root Your Device

Rooting is akin to having the master key to your device’s software. It allows you to gain superuser access, enabling modifications and access to system files that were previously restricted. With rooting, you can:

• Remove pre-installed apps or bloatware.
• Customize system settings and UI elements.
• Enhance performance or battery life through underclocking or overclocking the CPU.

Flash a Custom ROM

A custom ROM is a new operating system you can install on your device. This is one of the most popular reasons for OEM unlocking. Custom ROMs offer:

• The latest Android updates, even for older devices, are no longer supported by manufacturers.
• New features and customization options that aren’t available in the stock ROM.
• Potential performance improvements and unique user interfaces.

Enjoy High Customization

With an OEM unlocked device, the sky’s the limit regarding customization. You can:

• Install custom kernels for better performance and battery life.
• Use powerful apps that require root access for advanced device management.
• Customize everything from the boot animation to the layout of your UI.

However, it’s crucial to proceed with caution. Rooting and installing custom ROMs can void your warranty and, if not done correctly, can turn your device into an expensive paperweight (a state often referred to as “bricking”). Always use reliable sources for your custom ROMs and root-access apps.

Bonus: How To Unlock Your Android Screen When You Forgot Password

Forgetting the password to your Android phone can be a stressful experience. It locks you out of your device. It cuts your access to personal data, contacts, and essential apps. However, aside from OEM unlocking, learning the skill of screen unlocking is incredibly useful in such situations. It’s not just about regaining access. It’s about harnessing control over your device during forgetfulness or emergency.

Wondershare Dr. Fone’s Screen Unlock (Android) will save you in these situations. It’s designed to unlock your phone without requiring a factory reset. It saves your data from being erased. This feature supports unlocking patterns, PINs, passwords, and fingerprints, offering a comprehensive solution for regaining access to your device.

Dr.Fone - Screen Unlock (Android)

The Best UnlockJunky Alternative to Bypass FRP and Solve Your Screen Locks

• Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
• Bypass the FRP lock of Samsung without a PIN or Google account.
• Everyone can handle the lock screen without any tech knowledge.
• Provide specific removal solutions to promise good success rate.

4,008,671 people have downloaded it

How To Perform Screen Unlock With Dr.Fone

The process is straightforward. It involves connecting your device to a computer and running the Dr.Fone software. Then, you’ll follow simple on-screen instructions. Learn how to do those below:

• Step 1: Go to Toolbox > Screen Unlock. Connect your Android device with your PC.

• Step 2: Select Android on this page.

• Step 3: Select Unlock Android Screen.

• Step 4: Select your device brand.

• Step 5: Click Remove without Data Loss.

• Step 6: After confirming device details, type “000000” to execute the operation.

• Step 7: Follow the on-screen instructions for putting your device into download mode. Then, wait for the process to finish.

• Step 8: Once complete, click Done. If your device still isn’t accessible, click Try again.

Conclusion

In wrapping up, you’ve explored the ins and outs of “what is OEM unlock” in the Android world. It’s a key to opening up a trove of customizability on your Android device. It lets you tweak and tailor your phone to your heart’s content. But remember, with great power comes great responsibility.

Diving into OEM

How To Unlock Poco M6 Pro 4G Phone Without Password?

Has your Android smartphone been locked, and are you having trouble unlocking it now because you have forgotten phone password? Looking for methods to remove the password from your Android phone without doing a factory reset?

If the answer is “YES,” you’ve come to the correct spot.

Many people, including you, have had similar issues and wish to know how to unlock an Android phone without a password.

As a result, we have created some of the greatest guidelines or, you might say, top ways that may assist you in unlocking Android phones today, simply for you and countless other Android users.

Part 1: Unlock Your Locked Screen Without Password By 6 Efficient Ways

1. By your Google account

You can use your Google Account to unlock the Android phone password if, after several tries, you are still unable to do so without doing a factory reset.

You need to log into the Google account that is associated with the Poco M6 Pro 4G device, then do the following:

• The unlock pattern may only be used five times before a notification telling you to try again in 30 seconds appears.
• “Forgot pattern” will show up at the bottom of the screen.

• You must enter the Gmail account that is associated with the Poco M6 Pro 4G device here before selecting “Next.”

• That’s it; from this point forward, you may enter any new PIN or pattern that you can recall to unlock your smartphone.

2. Google Find My Device

Using your Google account is a superb method for finding the Poco M6 Pro 4G device when lost or stolen.

In addition, it may be used to lock or ring your smartphone. You may have noticed that there are three options available when using this feature: “Ring,” “Lock,” and “Erase.”

To bypass the Android lock screen, all you need to do is sign into the Poco M6 Pro 4G device’s associated Google account and then follow these steps:

• On any Android device or a computer, go to <www.google.com/android/find> and sign in using your Google account. Choose the Android smartphone you wish to unlock after that.
• After choosing the Poco M6 Pro 4G device, select one of the three options, “lock,” from the list.
• There will be a new pop-up window that you can use to change the Poco M6 Pro 4G device password. Additionally, you can choose to add a phone number or recovery email.
• Confirm it immediately, then input the password you just established on your locked device.

Many Samsung customers have this issue, which prevents them from using their devices. Try using the “Find My Mobile” feature on your mobile if you wish to unlock it if you’re a Samsung user. It would be helpful if you had a Samsung or Android model account.

After that, use Find My Device to unlock your Android phone without losing any data by following the instructions below:

• Sign in with your Samsung account at findmymobile.samsung.com.
• Choose “Lock my screen” from the menu on the left, type a new PIN in the box given, and then click “LOCK.”

Your smartphone will be unlocked, and the password will be changed to the new one after a brief delay.

3. Use ADB (Android Debug Bridge)

Without a factory reset, Android phone passwords may also be unlocked using the Android Debug Bridge (ADB).

• You must first download ADB to your computer. Visit the Android developer’s website at https://developer.android.com/studio/command-line/adb.html to do this.
• Launch the installer after that to begin downloading crucial software for your machine.

• Here, you must use a USB cable to connect your Poco M6 Pro 4G to the computer
• This will activate the developer option on your smartphone if you navigate to Settings > About Phone > and choose the “Build Number” option seven times.
• After that, activate USB debugging by going to Settings > Developer Options.

• Launch the command prompt in the ADB installation directory after your device is connected to the system.
• Press enter after typing “ADB shell rm /data/system/gesture.key” into the command line.

• Finally, just restart your smartphone and use it as normal.

4. Hard reset (data loss)

Each brand has a unique method for hard resetting a locked Android device. The methods to factory reset locked Android devices from Samsung, LG, HTC, Sony, and Huawei are compiled here.

When your phone is locked, you may access the recovery menu of your phone using its physical keys and choose to hard reset the Poco M6 Pro 4G device. Here’s how to restore a locked phone to factory settings.

• Use the buttons to see the recovery menu.
• Press and hold the Volume Up and Side buttons simultaneously until you see the brand logo on the screen for Android devices without a Power/Bixby/Home button.
• Press and hold the Volume Up, Bixby, and Power buttons all at once if your smartphone has a Power button. Releasing them before a logo arises is advised.
• Use the Volume Down key to highlight Wipe data/factory reset when the Android system recovery option displays, then hit the Power/Bixby key to choose it.
• Allow a few seconds for the factory reset procedure to finish after selecting Yes, or Factory data reset. The phone will reboot once you pick the Reboot system. Now you may configure it as if it were a brand-new gadget.

5. Unlock from Forgot Pattern (android 4.4 or lower)

This is another choice that might assist you in unlocking your phone without a factory reset or password. You may have observed that when pattern lock was enabled on your device, a security PIN question was also prompted at that time.

Therefore, you have the choice to Backup PIN, which might assist you in unlocking your smartphone, if you are unable to unlock it. To do it, take the following actions:

• Click on Android pattern lock.
• You’ll see a notification telling you to try again in 30 seconds after failing many times.
• The “Backup PIN” option will be there; choose it.
• Put the backup PIN and OK here.
• At last, you may unlock your cellphone by entering the backup PIN.

6. Boot into safe mode

Here’s how you can boot into safe mode.

• Hit the power button on your phone.
• Press and hold the volume down button on your phone as the animation begins. Hold it down until the animation is finished and your phone enters safe mode.
• “Safe mode” will be shown at the bottom of your screen.
• Out of safe mode
• Switch off your phone.
• Press the Power button on your phone for around 30 seconds, or until the Poco M6 Pro 4G device restarts.
• You will see that after entering and booting into the safe mode, the lock option will not be visible.
• Then you will also see the option to turn off boot.
• You can get rid of the locked phone by proceeding with that option.

Part 2: Easy Tool To Unlock Android Phone Without Password

If you forget the lock code, you can simply unlock your Android phone using Dr.Fone - Screen Unlock.

Have you encountered the same situation? Do not fret. You may use Dr.Fone - Screen Unlock to unlock the screen lock on Android smartphones. It enables you to erase an Android phone’s password, PIN, pattern, and fingerprint.

Let’s learn how to safely remove the Android lock screen.

Step 1: Connect your phone

Open Dr.Fone on your PC, then select “Screen Unlock” from the list of tools.

The Dr.Fone functionality is still usable with the old UI of the Dr.Fone Mac version, but we will update it as soon as we can.

Connect your Android phone to the PC via a USB cable. then click the “Unlock Android Screen” button on the software.

Step 2. Choose a device model

Nearly all Android devices feature locked displays, including Android. Because the recovery kits for different phone models vary, it’s important to pick the correct device brand to unlock the lock. Every model of supporting hardware is included in the list.

Step 3. Switch to download mode

If you then adhere to the instructions on the software, the phone will enter Download Mode.

• Offset your phone.
• Hold down the Power, Home, and Volume Down keys all at once.
• Use the Volume Up button to start Download Mode.
• Remove the Android lock screen starting now..

Step 4. Download a package for recovery

The recovery package will begin downloading once you set your device in download mode. Wait only till it is completed.

Step 5: Unlock Android without erasing data

After the recovery package download is finished, click “Remove Now.” This operation won’t harm any data on your Android device.

When everything is done, you won’t need to enter a password to access your Android smartphone, allowing you to see all of your data without any limitations.

Bonus Tips: How To Keep Our Data Safe?

Dr.Fone - Phone Backup is an excellent solution to keeping data safe and secure and baking it up before resetting your device, even if you have forgotten your password. You may quickly and conveniently back up practically all forms of Android phone data with Dr.Fone - Phone Backup (Android). Additionally, you may examine and export only certain types of data.

Here’s how you can use Dr.Fone - Phone Backup to keep data safe.

Step 1: Connect your Android phone to your PC.

Open Dr.Fone on your PC, then select “Phone Backup” from the menu.

Next, join your Android phone to the computer with a USB cable. The phone must be in USB debugging mode, please. You will be prompted to approve USB Debugging in a pop-up window on the Android phone if your version of Android is higher. Press the OK button if you would.

Click Backup to start backing up the data on your Android device.

If you have previously used this programme to back up your device, you may review your backup history by clicking on “View backup history.”

Step 2: Choose which file types to backup.

Once the Android phone is connected, select the file types you want to backup. Dr. Fone has previously examined all the file types for you. After that, click Backup to start the backup process.

It will cost some time for the backup. Do not disconnect your Android phone from the computer, use it, or delete any data while making a backup.

When the backup is complete, you may click the View the backup button to see what’s in the backup file.

The Bottom Line

It would be best if you had been able to answer the question, “How to unlock an Android phone without password,” using the techniques we have demonstrated here. The most effective way for resetting an Android phone is Wondershare Dr.Fone - Screen Unlock for Android. You may quickly reset a locked Android phone without a password with only a few clicks.