How to Unlock Poco X6 Pro Bootloader Easily

Do you want to unleash the true power of your smart phone? Do you wish to have complete control over your smart phone? If yes, well, here is the answer; unlock bootloader. For people who are already into the tricks of hacking and rooting smart phones, might be aware of this. But still, there are exciting new developments. Bootloader is a code existing in all operating systems which usually comes pre-locked. So, it is important, if you wish to have a custom ROM installed on the Poco X6 Pro device, or if you wish to have other controls like installing applications which are incompatible, to have the Poco X6 Pro device bootloader unlocked. But going through with the process of unlocking bootloader and rooting the Poco X6 Pro device will not help and rather might break the warranty of the Poco X6 Pro device. This definitely calls for a diligent watch on how to unlock HTC bootloader. So, it is imperative as a user to know the process of HTC bootloader unlock. This article serves you with some ways you could follow to unleash the true power of your HTC device. Here’s how you can do it.

Part 1: Why We Want to Unlock HTC Bootloader

For people with HTC device, unlocking bootloader would mean complete authority over the smart phone and you have all the power to control the HTC device by all means. Since, bootloader usually comes pre-locked, unlocking the bootloader is the initial step if you would like to have a custom ROM installed in your device. There are various advantages of HTC unlock starting from gaining rights of control to installing latest custom ROMs in the phone and installing incompatible applications. Moreover, HTC unlock bootloader could boost the Poco X6 Pro device speed and battery life and also help in making complete backups of the Poco X6 Pro device. You could also have controls to remove bloatware from the HTC device. So, all in all, while there could be certain side effects, if not done properly, there are various advantages of unlocking HTC bootloader. If the process is carried out properly, the Android device could be the perfect smart phone you would like to have.

Part 2: How to Unlock Poco X6 Pro Bootloader

Poco X6 Pro is the flagship device of HTC by all means. With a world of features and offerings, Poco X6 Pro truly is a beast. While the phone is very powerful without any modifications, the true potential is yet to be seen and that can only be done if the bootloader is unlocked. So, to have a complete control over the Poco X6 Pro device, it is important to unlock the bootloader and the process has to be carried out diligently. One of the initial things that needs to be ensured is that the Poco X6 Pro device is fully charged or atleast 80% mark. Make sure you have the fastboot drivers for the Poco X6 Pro device configured on the windows machine and the Android SDK. Here are some of the steps which can be followed to unlock bootloader.

Step 1: It is always very important to keep the phone data backed up and more so when you are planning to unlock the bootloader.

As one of the initial measures, backup the Poco X6 Pro device completely as bootloader unlocking process will wipe all the data off. So, backup all the data like photos, contacts, multimedia files, documents, etc.

Step 2: Go to htcdev.com/bootloader. Ensure that you are registered with HTC and once the sign up is done, log in to HTC dev.

Now, ensure that HTC Sync Manager is installed on the PC.

Step 3: From the bootloader page, select your device using the drop down option as shown in the picture below.

After selecting the Poco X6 Pro device, click on “Begin Unlock Bootloader”, and then confirm all the dialogue boxes which come your way on screen.

Step 4: Now, you will be presented with four steps to put the Poco X6 Pro device in bootloader mode. Disconnect the Poco X6 Pro device from the PC and turn the Poco X6 Pro device off completely. Press the volume down button along with the power button to switch the Poco X6 Pro device on in bootloader mode.

Step 5: Use the volume keys of the Poco X6 Pro device to select Fastboot option along with pressing power button to confirm, after the Poco X6 Pro device is in bootloader mode. Now, connect the Poco X6 Pro device to the computer using a USB cable.

Step 6: Go to Fastboot folder on the PC and holding down the shift key, click on any empty space followed by a click on “Open command window here”.

Step 7: In the command prompt window, type “fastboot devices” and press enter. Poco X6 Pro will show up in the command prompt.

Note: The drivers have to be installed correctly to see the Poco X6 Pro device in the command prompt. So, if the Poco X6 Pro device does not show up, reinstall HTC Sync Manager and try again after restarting the computer.

Step 8: On HTC Dev’s website third page, click on “proceed to Step 9”. Follow the steps listed and then click on submit. The unlock token code for the Poco X6 Pro device will be mailed by HTC. Download the token and name it “Unlock_code.bin” and place the token in the fastboot folder.

Step 9: Now, in the command prompt window, type the following:

fastboot flash unlocktoken Unlock_code.bin

Step 10: On the Poco X6 Pro , one message will appear asking if you want to unlock the Poco X6 Pro device bootloader.

Use volume keys to select and power button to confirm. Once this is done, the Poco X6 Pro device will restart once and it’s done. The device is now bootloader unlocked.

How to Reset a Poco X6 Pro Phone that is Locked?

We all have been there when put a tough to crack the lock on the smartphone and forget the password all along. Such circumstances can be tedious at times, but there is a way around it. If you have spent countless hours on how to reset a Poco X6 Pro phone that is locked, or how to get into a locked Poco X6 Pro phone quickly with or without Factory Reset. This is the right article for you. Here we will describe all the different ways in which you can reset your phone with the convenience of software to even reset it manually. So, without making further due, let’s jump right into it.

Part 1: What should I be aware of before resetting a Poco X6 Pro Phone that is locked?

Before you go to reset your locked Poco X6 Pro phone, it’s crucial to learn about a few key factors. These factors will enable you to make a well-informed choice and help avoid potential complications during the factory reset process.

1. Data Loss

Resetting your locked Poco X6 Pro phone typically involves performing a factory reset. The process erases all data and settings on the Poco X6 Pro device. This includes your files, apps, contacts, and other information stored on the phone. You can easily restore these data if you have backed up data before. It’s crucial to back up essential data regularly to avoid data loss.

2. Factory Reset Protection (FRP)

Poco X6 Pro , like many other Android manufacturers, implements Factory Reset Protection. It acts as a preemptive safeguard against unauthorized access to a device after a reset. If your phone is linked to a Google account, you will need to input the accurate login credentials after a reset.

Failing to do so may lead to your device being locked. Understanding how to bypass or recover from FRP lock is essential if you find yourself in this situation.

Part 2: How to Reset a Poco X6 Pro Phone That is Locked With Google Find My Device?

Resetting a locked Poco X6 Pro phone through Google Find My Device presents a convenient solution. It, however, needs you to have activated this functionality on your device. To initiate the reset, please adhere to the following steps:

Step 1: Open a web browser on any computer or alternative device and navigate to the Google Find My Device website. Sign in with the same Google account associated with your locked Poco X6 Pro phone.

Step 2: Upon successful login, a list of devices linked to your Google account will be displayed. Locate your locked Poco X6 Pro phone from the list and select it. Select the “Erase Device” option from the left-hand panel, and it will trigger a remote factory reset for your locked phone.

Step 3: A confirmation dialog will appear, prompting you to input your Google account password. Finally, click the “Erase” button to initiate the factory reset process.

Part 3: How to reset a Poco X6 Pro phone that is locked without a password?

In order to reset your Poco X6 Pro phone without a password, you need to have a single software known as Dr.Fone - Screen Unlock (Android) . It’s a powerful and versatile software tool designed to help you unlock your devices under various circumstances. Whether you’ve forgotten your device’s password, PIN, pattern, or fingerprint, or you’re dealing with a locked device due to a broken screen, Dr.Fone - Screen Unlock (Android) can assist you. In order to reset phone correctly, go through the steps given below:

Before resetting your Poco X6 Pro phone that is locked, you can install the Dr.Fone application on your Windows PC or Mac first.

Dr.Fone - Screen Unlock (Android)

The Best Unlock Tool to Reset a Poco X6 Pro Phone That Is Locked Without a Password!

• Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
• Work for forgotten passwords, second-hand Poco X6 Pro devices, etc.
• Everyone can handle the lock screen without any tech knowledge.
• Provide specific removal solutions to promise good success rate.

4,008,671 people have downloaded it

Step 1: Launch the Program

First of all, launch the Dr.Fone Screen Unlock on your computer, and you will be greeted with a welcome screen like this. Now, head over to the “Screen Unlock” section.

Step 2: Connect Device

Now, you need to connect your Poco X6 Pro phone to the computer via a USB cable and select “Android” > “Unlock Android Screen.” This particular step is an application for all the Android phones out there.

Step 3: Choose Device Model

Here you need to select the exact brand of your phone. In your case, you can just tap “Poco X6 Pro .” The program then will start the process for the lock screen removal.

Step 4: Unlock Screen

Go along with the instructions on the screen and remove all the settings of the Poco X6 Pro device. Within a short while, the screen will be unlocked.

After the entire process is completed, you can easily access your Poco X6 Pro Phone without the need to enter your password. All the restrictions that were set properly to unlock will be removed so that you can use your phone as intended.

Part 4: How to reset a Poco X6 Pro phone that is locked with a hard reset

Disclaimer: Only perform this step if you are well accustomed to the Android recovery system or at least know your way around your Poco X6 Pro phone.

That being said, you should only resort to using a hard reset if you don’t have any important data on your phone. Further including, resetting your phone with the hard reset option will wipe out any data that’s been stored in it. Now, proceed forward will all the steps are given below:

Step 1: Charge Device

Charge your Poco X6 Pro Phone so that it has a batter of at least 30% or higher. Then turn off the phone.

Step 2: Press keys

Now, you need to press the Volume Down + Power button simultaneously until the Poco X6 Pro device logo shows up on the screen.

Step 3: Enter Recovery Mode

Now, press the Volume Down button to navigate to the Recovery Mode.

Step 4: Factory Reset

Use the buttons to navigate to the “Wipe data/factory reset” option and select it by pressing the Power button. Now, choose the option ”Factory data Reset” and wait for a few seconds till it is completed.

Step 5: Reboot Now

Again use the Volume buttons and select the “Reboot system now.”

After you have successfully reset your Poco X6 Pro phone, it would take a few minutes to boot up. Once that is done, you are left with a clean slate, just like a completely new smartphone.

Part 5: Unlock locked Poco X6 Pro phone with Gmail ID and password

It is imperative to understand that unlocking your Poco X6 Pro Phone using a Gmail ID and password should be your last resort and especially if you are using an older version of Android. Among all the tricks of how to reset a Poco X6 Pro phone that is locked, it only works if you are running around version 4.4 KitKat or older than that. Neither less to say, in order for the step to work properly, you need your Gmail account to be properly configured with the Poco X6 Pro device.

Step 1: Attempt Passwords

At first, you need to make five attempts to unlock your device. Whether you have used a PIN or Pattern lock, Android will always give you five attempts to get the password right. Once you get that, it will trigger the “Forget Password/Pattern” option on Your Poco X6 Pro. This way, you can sneak back into the system once again.

Step 2: Enter Credentials

Once you hit the option, you will be redirected to another page, where you need to enter your Gmail id and password. Make sure that you get the information right, and select “Sign in.”

Once you get everything right, this will bypass any password or pattern you once had put on your Phone. Just remember, you need to have a stable internet connection in order for the step to work seamlessly.

Bonus Tip: Are There Preventive Measures To Avoid Future Lockouts?

Want to prevent future lockouts and ensure a smoother smartphone experience? Consider implementing the following preventive measures:

1. Setting Up Alternative Lock Methods

One way to avoid getting locked out of your Poco X6 Pro phone is to set up alternative lock methods. In addition to PINs, passwords, and patterns, you can use biometric methods. These include fingerprint recognition or facial recognition if your device supports them. Such options provide convenient and secure ways to unlock your phone.

2. Regularly Backing Up Your Data

Regular data backups are crucial to safeguarding your essential files and information. Utilize cloud backup services or local backup solutions to routinely save your data. In case of a lockout or a factory reset, you can quickly restore your data without loss.

3. Using Secure and Memorable Passwords

When setting up lock methods, opt for strong, unique, and memorable passwords. Avoid using easily guessable information like birthdays or simple patterns. Strong passwords can enhance security while minimizing the chances of forgetting your credentials.

Conclusion

There is no point in arguing that looking through how to reset a Poco X6 Pro phone that is locked after you have forgotten the password is indeed a hectic process. But, there is a way around it too. By going through all the steps mentioned above, you can always get an unlocked phone with ease.

To our recommendation, we would suggest going through Dr.Fone - Screen Unlock (Android) so that you can make the entire process as seamless as possible. It is by far the easiest and most convenient process to work around. Neither less to say, there are a ton of video tutorials that can assist you in case you get stuck in the middle of the process.

How To Change Poco X6 Pro Lock Screen Password?

Setting up a lock screen is a crucial step in protecting your phone’s data. If you’re not sure how to create one on your Android™ phone, we’re here to help.

Your Android lock screen pin or password and your Google Account password are two passwords you use frequently. Keeping a good lock screen passcode is important.

Although you might not frequently enter your lock screen pin or password if you use a biometric unlocking method like fingerprint or facial recognition, it’s still important to be familiar with it.

You’ll need to reset your Google Account password if you forget it or become locked out for some other reason when you try to keep accessing all of your data. You might also need to change lock screen passcode from time to time.

How to Change/Set up Lock Screen Password

Select Screen Lock Type under Settings > Lock Screen. From there, you may select from a variety of lock screen options:

Swipe: This lock type allows you to swipe in any direction on your screen to unlock your phone.

Pattern: If you opt to unlock your phone in this manner, you must create a pattern on a 3-by-3-dot grid.

Pin: A PIN lock is a four-digit code. Make sure you select a set of numbers that you can quickly recall.

Password: Your phone’s highest level of security. Your password must be distinct, easily remembered, and include at least one letter and 7 characters.

Follow the setup instructions on-screen after selecting the security measure you prefer.

Additionally, you’ll notice options to enable fingerprint or face biometric recognition features. Iris Scanner (S8/S8+) or Intelligent Scan (S9/S9+) may also be available on some older Samsung® models.

Face recognition: By holding your face directly in front of your phone’s screen, you may unlock your phone and authenticate yourself in apps.

With fingerprints, you can quickly touch your finger to unlock your phone.

Iris: Check your eyes to make sure that only you can see the contents of your phone.

Intelligent Scan: A method of device unlocking that combines face and iris recognition technology.

Follow on-screen instructions if you decide to employ one of these sophisticated security technologies, or go to Settings > Biometrics and security for more customization choices.

How to look up saved passwords on my device?

The way that Google Chrome manages your usernames and passwords is excellent. But what if you want to log in to a particular website from another device but can’t recall your password, and the website won’t load the data for you? You may quickly obtain a list of all saved passwords by browsing through Chrome’s settings, then manually keying it in.

You may access the passwords saved in the Google Chrome app on a Mac or PC because the app is connected to your Google account. Any passwords saved on your Android phone can easily be removed via the Chrome app.

How to Change your Password when you forget it?

1. Google Find My Device

As you are likely aware, every Android device is connected to a Google account. As a result, if you’d like, you may use it to unlock Android as well. You’ll need to know your Google account login information for this. When you’re ready, use these instructions to find out how to unlock a phone password.

1. Login in using your Google credentials by going to the official Google Find My Device website.
2. You will see the gadgets connected to your Google account as you enter the interface, along with a map of where they are.
3. To wipe the Poco X6 Pro device, click the ERASE DEVICE option on the left side panel. You will then be required for your password.
4. Once more, select “Erase.” This will reset the Poco X6 Pro device and get rid of the forgot pattern lock.

2. Using Recovery Mode

Users of Android smartphones and tablets can troubleshoot various issues with their devices using a feature known as Android Recovery Mode. It might be helpful if you discover that your device is functioning strangely. Recovery Mode Android technically refers to a unique bootable partition with a recovery application installed inside it.

However, users can also use it to reset the android password if it is forgotten. The instructions for resetting android devices through recovery mode are different for every android device.

3. Forgot Password Feature (Android 4.4 and Lower)

In case you lose your pattern, PIN, or other passwords, older versions of Android, including Android 4.4 KitKat, have an integrated feature to let you continue using your device.

Enter an erroneous pattern or PIN five times on the lock screen to reveal this function. A button with the words “Forgot pattern,” “Forgot PIN,” or “Forgot password” will show up. Tap it. The username and password for the Google account connected to your Android smartphone will be required.

4. Using ADB

Launch Recovery mode and restart the phone. Turn off your phone. Then to access the Bootloader, simultaneously press the Power button and the Volume Down key. Then select Recovery mode.

Use USB to connect the phone. You must have ADB set up on your computer. (ADB is part of the Android Developer Bundle)

Use the shell’s following command to start

Rm /data/system/gesture.key using the adb shell

Turn the phone back on normally. Any pattern will unlock the screen, and you will be prompted to enter one.

Bonus Method: Dr.Fone - Screen Unlock

On most Android handsets, you can attempt Dr.Fone to unlock the screen lock easily. It allows you to delete the password, PIN, pattern, and fingerprint from an Android phone.

Step 1. Select Unlock Android Screen

Please select “Unlock Android Screen.”

Step 2. Select device model

On this page, please choose the option fitting your phone.

Only when you select the right phone brand so the unlock process will go with success.

Step 3. Enter into Recovery Mode

Then go with the instructions for getting the Android phone into Recovery Mode. Here we show you examples of Samsung phones.

(Recovery Mode When the Samsung phone via Bixby)

(Recovery Mode When the Samsung phone via Bixby)

(Recovery Mode When the Samsung phone via Home button)

Step 4. Instructions to Wipe Cache Partition

On the page Recovery Mode, you’ll see this interface to continue your unlock process.

Now you can access your Android device without entering any password after the unlock process is well done.

Conclusion

Any of the aforementioned methods can be used to overcome the obstacle of using your Android handset. The best thing about this article is that you only need some simple unlock ways to complete the tasks. Dr.Fone - Screen Unlock is the easiest way of restoring your device if you have a stuck password or fingerprint.